Converting between metric and US units
Metric units (also called SI units) and U.S. customary units measure the same things in different ways. You can convert lengths, weights (mass), volumes and temperatures from one system to the other.
A quick card from NIST gives approximate conversions for length, area, mass, volume and temperature. Approximate is fine for everyday jobs. When you need exact numbers, a more detailed NIST reference of conversion factors is the better choice.
Conversion is a few steps:
- Pick the right conversion factor. This is a ratio that turns one unit into another.
- Multiply or divide by that factor.
- Choose a sensible number of digits and round.
Here are some widely known approximate factors:
| Measure | Approximate conversion |
|---|---|
| Length | 1 inch ≈ 2.54 centimeters |
| Mass | 1 pound ≈ 0.45 kilograms |
| Volume | 1 gallon ≈ 3.8 liters |
| Temperature | °F = °C × 1.8 + 32 |
Worked example: Sam has a board that is 10 inches long and wants to know the length in centimeters.
Step 1: Use the factor 2.54 centimeters per inch.
Step 2: Multiply: 10 × 2.54 = 25.4.
Step 3: Round if you like. The board is about 25 centimeters long.
To go the other way, divide by the same factor. For example, 25.4 centimeters ÷ 2.54 = 10 inches.
A good habit is to check that your answer makes sense. Centimeters are smaller than inches, so a length in centimeters should be a bigger number.
